The harness surface adopts different binding methods according to different parts of the harness:

1.The engine harness is in the most severe environment, requiring high temperature resistance, high

   abrasion resistance, oil resistance, flame retardant, waterproof, and corrosion resistance tape.

   Junyan's high performance tape is an ideal for engine harness protection.Recommended:3301、4020、4020X

2.The working space of the door harness is relatively small, and it may collide with hard materials and

   cause noise and abrasion. Highly wear-resistant and noise-reducing tapes should be used. Meanwhile,

   colored PVC tapes can be used to facilitate the identification of the four-door wiring harness.Recommended:3100、4210、4400

3.The IP harness concentrates most of the operating switches, display devices and multiple control units

   of the entire vehicle, and it may collide with hard materials and cause noise and abrasion. Therefore,

   the tape must have good sheilding, high abrasion resistance and noise reduction performance, Some

   parts can be wrapped with dry vinyl tape. Junyan has developed different high-performance tapes to

   meet different requirements.Recommended:3401、4400、9050

4.The body harness has a lot of contact with other parts, which is prone to interference friction

   and noise. Therefore, the tape in this area should have high noise reduction and high abrasion

   resistance performance. Junyan butyl water sealing mastic is an ideal for water proofing and

   sealing for dry and wet joint parts.Recommended:4000、4400、9060

5.The working space of the headlining harness is small, it can be completely wrapped with PVC

   tape, the thinner harness can be directly fixed with foam tape.Recommended:3100、9010

6.The working space of the headlight harness is small, it can be completely wrapped with tape.

   High temperature resistance PET fabric tape and PET fleece tape are recommended.Recommended:4010、4300